We need to start to fill up lemmy :) Can you solve this issue? My HEVO
(Hypercube Evolution), now 5 years old started to have very weird banding. It
has a Bowden BMG Extruder and a E3D V6 printhead with CHT-Nozzle. MKS Robin with
TMC2209 and Klipper. Benchy is ABS, lower one is HIPS. Printed at 230°/105° bed.
part cooling fan off. I took apart and cleaned the extruder. The gears look
intact and i can move the extruder by hand without binding. I found the E3D V6
was loose. I retightened it, which didn’t solve the issue. I’ll spend a beer to
the one that solves this issue ;)
@mods: maybe link community !fixmyprint@lemmy.world in the sidebar?
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !3dprinting@lemmy.world
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at:
!functionalprint@kbin.social
or !functionalprint@fedia.io
There are CAD communities available at:
!cad@lemmy.world or !freecad@lemmy.ml
Rules
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
