Absolutely, I was going to use a lighter shade of wood it kept clogging on me. Do I switched to the light brown pla. I think moisture is a big component in that too
You might try a 0.6mm nozzle, I know some manufacturers recommend >0.4 for filaments with filling in them.Very cool project though, you’re giving me some ideas.
I feel it. Those quick-swap nozzles are pretty appealing. Every time I swap a nozzle on the bambu I literally swap the entire hotend and unplug 3 delicate connectors. I’m worried they’ll break after a couple dozen swaps.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !3dprinting@lemmy.world
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at:
!functionalprint@kbin.social
or !functionalprint@fedia.io
There are CAD communities available at:
!cad@lemmy.world or !freecad@lemmy.ml
Rules
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Thank you! Standard 0.4mm nozzle, 0.2mm layers
One of those two filaments is wood fill right? Do you ever get clogs with the 0.4 nozzle?
Absolutely, I was going to use a lighter shade of wood it kept clogging on me. Do I switched to the light brown pla. I think moisture is a big component in that too
You might try a 0.6mm nozzle, I know some manufacturers recommend >0.4 for filaments with filling in them.Very cool project though, you’re giving me some ideas.
Yeah I might try that next time. I have .8 and 1.0 too, but too lazy to keep swapping 😂
I feel it. Those quick-swap nozzles are pretty appealing. Every time I swap a nozzle on the bambu I literally swap the entire hotend and unplug 3 delicate connectors. I’m worried they’ll break after a couple dozen swaps.
I couldnt do it! I bought a pack of volcano nozzles for dirt cheap in all sizes, volcano is forever!