I’ve got a project in mind I’d like to test with the community before going ok deep on.
I’d like to put together a face-recognising NVR closely tied to homeassistant. I’m thinking of using an RPi4 with a coral attached. Then installing docker and including the following:
frigate
doubletake
compreface (unless others recommend a better detector?)
I have an MQTT server in HA but also wondering if it makes sense to have a local MQTT server for the NVR.
As usual, I’m working on the edge of what I know, so any suggestions/comments on things that might trip me up would be warmly welcomed.
Make sure your RPI4 is 64-bit, mine was a 32 bit arm and had a numpy version error preventing it from starting. The frigate devs basically said it only supports 64 bit moving forward.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !homeassistant@lemmy.world
Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io
Make sure your RPI4 is 64-bit, mine was a 32 bit arm and had a numpy version error preventing it from starting. The frigate devs basically said it only supports 64 bit moving forward.