TLDR = what’s a good next step after kid-friendly 3d creation tools?
Solved = Fusion360 is voted as winner, we even got a nice tutorial playlist.
Hi all - I’m still very much a new user. Highly skilled in IT but just getting my feet wet in 3D printing, since a month or so. I love the possibilities! I can physically create anything I can image, it’s amazing.
So far, I’ve used mostly TinkerCad and done lots with it. The learning curve is practically non-existent, and it has sufficient features to do a lot.
But of course it’s not perfect. Obvious example: can’t do fillets, except in roundabout ways using negative blocks.
I’ve tried OnShape, OpenScad, Fusion 360, but found them quite a steep hill to climb.
Are these good choices, or is there something in-between that would make it easier for me to advance?
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)
Moderation policy: Light, mostly invisible
FreeCAD might fit your bill. You can do many things but it’s definitely not a fully blown professional CAD yet. On the downside, it’s not always super well documented.