TLDR = what’s a good next step after kid-friendly 3d creation tools?
Solved = Fusion360 is voted as winner, we even got a nice tutorial playlist.
Hi all - I’m still very much a new user. Highly skilled in IT but just getting my feet wet in 3D printing, since a month or so. I love the possibilities! I can physically create anything I can image, it’s amazing.
So far, I’ve used mostly TinkerCad and done lots with it. The learning curve is practically non-existent, and it has sufficient features to do a lot.
But of course it’s not perfect. Obvious example: can’t do fillets, except in roundabout ways using negative blocks.
I’ve tried OnShape, OpenScad, Fusion 360, but found them quite a steep hill to climb.
Are these good choices, or is there something in-between that would make it easier for me to advance?
All parametric modeling or CAD software is going to have a pretty steep learning curve, I think. For all the things I design I exclusively use FreeCAD. I just can’t get behind being locked in to proprietary and non-free software with predatory licensing schemes for this sort of thing, so I never touch anything from AutoDesk or Adobe… even if it is “free.”
All parametric modeling or CAD software is going to have a pretty steep learning curve
I disagree a little bit. I feel like I learnt maybe 10% of fusion 360 several years back and it’s been enough for me to design everything I’ve needed, whilst learning about other features gradually as necessary.
Op should just bite the bullet and get onto some parametric cad software.
Having spent a little time with Fusion now, I agree with you and I am now also trying to wrap my head around FreeCad. I find that parametric modeling is hard compared to TinkerCad’s stacking toddler blocks together 🙃
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !3dprinting@lemmy.world
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at:
!functionalprint@kbin.social
or !functionalprint@fedia.io
There are CAD communities available at:
!cad@lemmy.world or !freecad@lemmy.ml
Rules
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
All parametric modeling or CAD software is going to have a pretty steep learning curve, I think. For all the things I design I exclusively use FreeCAD. I just can’t get behind being locked in to proprietary and non-free software with predatory licensing schemes for this sort of thing, so I never touch anything from AutoDesk or Adobe… even if it is “free.”
I disagree a little bit. I feel like I learnt maybe 10% of fusion 360 several years back and it’s been enough for me to design everything I’ve needed, whilst learning about other features gradually as necessary.
Op should just bite the bullet and get onto some parametric cad software.
Having spent a little time with Fusion now, I agree with you and I am now also trying to wrap my head around FreeCad. I find that parametric modeling is hard compared to TinkerCad’s stacking toddler blocks together 🙃