I would love to print this case for my Sofle v2 keyboard. Since I don’t own a 3D printer (… yet) I would like to do this by using an online printing service like PCBWay. Before I order, I do have some questions, since I have never printed anything.
What percentage of infill do you folks suggest? I was thinking 100% would be most stable.
Would PLA be a good material? I was thinking on filling and sanding it.
the project only has the parts for one side. Is there an easy way to mirror everything ?
Do you guys know a good printing service in Tokyo?
If this is the wrong community please feel free to delete this post.
Infill has massively diminishing returns. I don’t think 100% is required. Usually it’s much better to increase the number outer layers.
That said, depending on the cost scaling, the possibly positive effects of extra mass, and how much I want to avoid a second attempt, massive objects can make some sense.
PLA becomes brittle with moisture (from your hands and/or air). I would recomment PETG / ASA / ABS (ascending order).
Yes, basically all CAD and slicers (3d-printer software) can mirror. PrusaSlicer for example can mirror and then save to stl again.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !3dprinting@lemmy.world
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at:
!functionalprint@kbin.social
or !functionalprint@fedia.io
There are CAD communities available at:
!cad@lemmy.world or !freecad@lemmy.ml
Rules
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Infill has massively diminishing returns. I don’t think 100% is required. Usually it’s much better to increase the number outer layers.
That said, depending on the cost scaling, the possibly positive effects of extra mass, and how much I want to avoid a second attempt, massive objects can make some sense.
PLA becomes brittle with moisture (from your hands and/or air). I would recomment PETG / ASA / ABS (ascending order).
Yes, basically all CAD and slicers (3d-printer software) can mirror. PrusaSlicer for example can mirror and then save to stl again.