I’m wanting to heavily mod my 3D45. I basically want to use a raspberry pi to run it, but just repurpose the existing hardware.
I am new to this area of 3d printing, and would love some suggestions to get started. I know of octoprint, but does it do all of the reading gcode?
Never heard of this printer brand, but if it turns out that its mainboard isn’t compatible with what you’re trying to do then it might be an option to replace it with a cheap stepper driver board from AliExpress. You wouldn’t need anything fancy if you’re running Klipper on your RPi
If you’re going to controll your board with another board, you might want to also look at Klipper. If you decide to go this route, the Voron documentation has pretty good setup instructions, but obviously you’ll have to work out the specifics for your build. I personally really like what you can do with Klipper (macros, tuning, etc) and find it fairly straightforward.
If you go Klipper, the PI will parse the g-code, and apply things like pressure advance and resonance compensation, before sending instructions directly to your printer board.
I’m not familiar with your particular printer, but if it’s popular at all you should be able to find the controller board online, from there you can probably find a pin out chart and maybe even a premade Klipper profile.
If you can’t find a premade profile, the official Klipper website has a template profile you can copy/paste and fill in your board’s pins/ settings. Once you get the hang of how things operate, your workflow will increase DRAMATICALLY, and the possibilities of what you can accomplish are limited to how much time you want to spend figuring out how to do it. I just eliminated the need to re-slice models between filaments that require completely different temp, retraction, PA etc settings, all it took was an afternoon and some coffee!
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !3dprinting@lemmy.world
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at:
!functionalprint@kbin.social
or !functionalprint@fedia.io
There are CAD communities available at:
!cad@lemmy.world or !freecad@lemmy.ml
Rules
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Never heard of this printer brand, but if it turns out that its mainboard isn’t compatible with what you’re trying to do then it might be an option to replace it with a cheap stepper driver board from AliExpress. You wouldn’t need anything fancy if you’re running Klipper on your RPi
If you’re going to controll your board with another board, you might want to also look at Klipper. If you decide to go this route, the Voron documentation has pretty good setup instructions, but obviously you’ll have to work out the specifics for your build. I personally really like what you can do with Klipper (macros, tuning, etc) and find it fairly straightforward.
If you go Klipper, the PI will parse the g-code, and apply things like pressure advance and resonance compensation, before sending instructions directly to your printer board.
Klipper + mainsail is truly great.
This post has a little bit of age now, have you taken the Klipper pill yet?
Yup! Just got it installed on my pi. Still gotta wire it in. Any documentation to help? I haven’t found out which controller I have yet.
I’m not familiar with your particular printer, but if it’s popular at all you should be able to find the controller board online, from there you can probably find a pin out chart and maybe even a premade Klipper profile.
If you can’t find a premade profile, the official Klipper website has a template profile you can copy/paste and fill in your board’s pins/ settings. Once you get the hang of how things operate, your workflow will increase DRAMATICALLY, and the possibilities of what you can accomplish are limited to how much time you want to spend figuring out how to do it. I just eliminated the need to re-slice models between filaments that require completely different temp, retraction, PA etc settings, all it took was an afternoon and some coffee!