So i got an ikea on/off switch, i i have it connected via zigbee2mqtt, it says there is newer firmware, but when i try to update to it, it doesn’t do anything, i tried pressing the buttons on it while updating, because the zigbee2mqtt documentation for the switch said that but it still doesn’t update
See if it’s a firmware version problem like on the styrbar.
Another clue: on bulbs of the same model, I had an upgrade error via z2m blocked at 4%, I had to turn off the power completely, wait for the timeout and restart the upgrade for it to work.
If that’s not it either, the logs are a good lead.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !homeassistant@lemmy.world
Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io
Maybe a lead here : https://github.com/Koenkk/zigbee2mqtt/issues/10666
If that doesn’t help, it would be great if you could give more info about your switch model, its version, and more logs if you can.
Hi,
See if it’s a firmware version problem like on the styrbar. Another clue: on bulbs of the same model, I had an upgrade error via z2m blocked at 4%, I had to turn off the power completely, wait for the timeout and restart the upgrade for it to work.
If that’s not it either, the logs are a good lead.
Device didn’t respond to ota request. Have you tried deleting the z2m switch and then reinstating it by pressing the button 4 times?
If that’s not enough, you’re really going to have to go further in the debugging process.