Meh, while there really could be less. At least they are all physically compatible. And backwards protocol compatible to the lowest common denominator. Which is a huge step forward.
Seriously, as an IT person, I still never know what most of my USB ports are capable of, but I’m glad they are backwards compatible. If something is slow, then I try a different cable and port.
It gets even better, each function of the port also needs proper support from the cable. Often cables do not support the full spec of usb to cut costs.
While the symbols in the post are often put on computers, for usb cables this is seldom done (only a few brands do).
Source: had to find a cable that supports both DP and PD to connect a portable external monitor after I lost the original cable. (1/9 cables worked)
For that portable monitor, you should just need a cable with USB-C plugs on both ends which supports USB 3.0+ (could be branded as SuperSpeed, 5Gbps, etc). Nothing more complicated than that.
The baseline for a cable with USB-C on both ends should be PD up to 60W (3A) and data transfers at USB 2.0 (480Mbps) speeds.
Most cables stick with that baseline because it’s enough to charge phones and most people won’t use USB-C cables for anything else. Omitting the extra capabilities lets cables be not only cheaper but also longer and thinner.
DisplayPort support uses the same extra data pins that are needed for USB 3.0 data transfers, so in terms of cable support they should be equivalent. There also exist higher-power cables rated for 100W or 240W but there’s no way a portable monitor would need that.
Yeah, it’s gotten so bad I eventually ordered a USB cable checker to figure out what any given USB cable is capable of (and to see if the cable has gone flaky, which seems to happen a lot). I haven’t received it yet so I don’t know if I can recommend this item, but … gosh darn you sure need something like this.
The USB-C standard and particularly the USB PD (power delivery) is so complex it almost feels comical.
The PD standard document (freely available on usb.org) is over 800 pages long and features a lengthy part about the role of the cable alone which is mostly hidden from the user. Here’s a short video about this issue: https://www.youtube.com/watch?v=6bZ0y9G-4Pc
If you’re trying to get Lemmy to print the backslash, you need to make it a double backslash since backslash is an “escape” character that means “ignore any special formatting meaning of the next character” (among other meanings)
Thank God there’s a standard for USB. And another one. And another one. And another one. And another one. And another one. And another one. And another one. And another one. And another one. And another one. And another one…
The standard might be complicated if you want the specifics, but for everyday use it’s incredibly simple, and I love it. The number of times I needed this information is 1, even though most of my devices, including an external monitor, are USB-C.
I’ve never seen any of the SS 10gig or USB PD icons, but I’ve seen the rest. I’ve got Thunderbolt icons on at least 2 icons and SS USB 3.1 icons on many normal USB A ports.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !technology@lemmy.world
This is a most excellent place for technology news and articles.
Handy guide, but this whole USB situation is a cock-up, since it needs the freakin guide in the first place.
Meh, while there really could be less. At least they are all physically compatible. And backwards protocol compatible to the lowest common denominator. Which is a huge step forward.
Seriously, as an IT person, I still never know what most of my USB ports are capable of, but I’m glad they are backwards compatible. If something is slow, then I try a different cable and port.
Well, except all the legacy symbols on devices older than current gen.
No symbol for power-only ports?
These are found almost exclusively on PC/laptops/tablets. Which I’ve never seen a power port only on.
It gets even better, each function of the port also needs proper support from the cable. Often cables do not support the full spec of usb to cut costs.
While the symbols in the post are often put on computers, for usb cables this is seldom done (only a few brands do).
Source: had to find a cable that supports both DP and PD to connect a portable external monitor after I lost the original cable. (1/9 cables worked)
For that portable monitor, you should just need a cable with USB-C plugs on both ends which supports USB 3.0+ (could be branded as SuperSpeed, 5Gbps, etc). Nothing more complicated than that.
The baseline for a cable with USB-C on both ends should be PD up to 60W (3A) and data transfers at USB 2.0 (480Mbps) speeds.
Most cables stick with that baseline because it’s enough to charge phones and most people won’t use USB-C cables for anything else. Omitting the extra capabilities lets cables be not only cheaper but also longer and thinner.
DisplayPort support uses the same extra data pins that are needed for USB 3.0 data transfers, so in terms of cable support they should be equivalent. There also exist higher-power cables rated for 100W or 240W but there’s no way a portable monitor would need that.
Yeah, it’s gotten so bad I eventually ordered a USB cable checker to figure out what any given USB cable is capable of (and to see if the cable has gone flaky, which seems to happen a lot). I haven’t received it yet so I don’t know if I can recommend this item, but … gosh darn you sure need something like this.
Oh… Oh!
“Universal”
My dick fits into all of them
Seems pretty universal to me 😎
The superiority of german aryan ports proven once again.
(this is a joke, nazism is evil and I hate it)
The USB-C standard and particularly the USB PD (power delivery) is so complex it almost feels comical.
The PD standard document (freely available on usb.org) is over 800 pages long and features a lengthy part about the role of the cable alone which is mostly hidden from the user. Here’s a short video about this issue: https://www.youtube.com/watch?v=6bZ0y9G-4Pc
My laptop has two USBC ports. No logos of any kind. They are Thunderbolt 4. ¯_(ツ)_/¯
If you’re trying to get Lemmy to print the backslash, you need to make it a double backslash since backslash is an “escape” character that means “ignore any special formatting meaning of the next character” (among other meanings)
That meme sucked
Thank God there’s a standard for USB. And another one. And another one. And another one. And another one. And another one. And another one. And another one. And another one. And another one. And another one. And another one…
The standard might be complicated if you want the specifics, but for everyday use it’s incredibly simple, and I love it. The number of times I needed this information is 1, even though most of my devices, including an external monitor, are USB-C.
deleted by creator
Every computer store should have a poster about this.
I’ve literally never seen any of these except the top symbol.
I’ve never seen any of the SS 10gig or USB PD icons, but I’ve seen the rest. I’ve got Thunderbolt icons on at least 2 icons and SS USB 3.1 icons on many normal USB A ports.
LOL, yeah, manufacturers don’t follow this at all.