I just upgraded from 11 pro to 15 Pro max, I didn’t have to as it was still running fine on iOS 16 and the cameras were great but it’s nice to have the fastest cpu, 24MP pictures, 5x optical zoom, 120Hz and always on display.
I bought iPhone 12 when it came out but returned it due to having yellow screen issues which have never been fixed.
I bought 11 pro instead as it actually takes better pictures than the 12.
I knew something was wrong with that phone 😅
I’ve been happy with my setup for two years, I’ve got 15 devices, ikea light bulbs, ikea switches and motion sensors, it all works perfectly until last month or two.
Motion sensors start to change the status to “clear” which triggers the lights off while I’m still moving in the kitchen and bathroom.
Quite often now lags happen between motion sensor switching on the lights or the switch turning lights on or off - it always used to be instant.
My setup is not the newest as I’ve got RaspberryPi with CC2531 but I’ve been running old software all that time so that’s not the case, I’ve only updated everyone now hoping it will fix my issues but that didn’t help…
I know probably you will say I need to check logs but did anyone experience this?
I don’t use my setup for anything else like Plex Server or FTP etc…
That’s some examples errors I found when I was using ikea switch to turn the lights on.
Is it best to have HA on Windows instead using different dongle like SkyConnect?
Update:
Thanks to @sidewalker@thesidewalkends.io for pointing me in the right direction.
Somehow I never considered interference to be an issue.
Recently I bought a Google Wi-Fi mesh system (pack of three) and I didn’t realise it could have caused interference with zigbee…
I changed the channel from the default 11 to 25 and the whole setup is working perfectly again!
I also moved the RPi closer to most of the smart devices and I’ve put the USB coordinator on an extension cable but I’m 99% sure the channel 11 was the main issue.
I’ve been running that for about two years as well and it’s been fine, but from some time it won’t update and won’t create a backup anymore… It says: “You are running an unsupported installation” and “Your installation is unhealthy”.
I think I looked into that a few months ago and it turned out there was some change and I’d have to update docker first, but then I’ve been reading that all your devices disappear, so I really don’t have time to add all the light bulbs and motion sensors and switches and create blueprints from scratch…
So I bought a new SD card and I’m planning to run a fresh install and then I copied the config folder via WinSCP and I’m hoping I can restore that as a backup.
I’m running 5.13 on RPi 2 and I think it’s time to finally update, I only use it for lightbulbs and motion sensors really and it’s running fine aparto from not being able to make a backup and update via the GUI. I think it’s best to just make a fresh install, I’m going through the setup and I can only choose Home Assistant OS 10.3 (RPi 3) - can I choose this to install on my RPi 2?
Update:
I think I found a proper release for RPi 2 here:
https://github.com/home-assistant/operating-system/releases
haos_rpi2-10.4.img.xz
Do I just install it using RPi Imager and then selecting custom img?
Can confirm, it had swipe to reply for a while now, it’s coming to iMessage in next iOS…
The only thing that annoys me about WhatsApp is the high picture compression resulting in low quality images.
Ahh I figured it out.
I went to Supervisor > Zigbee2mqtt > Configuration tab - there I noticed there was still old IP (server: mqtt://192.168.0.35:1883), I’ve updated that and now everything works again!
I installed Google Wifi which resulted in having new network, old router was under 192.168.0.1, new Google is on 192.168.1.1.
So previous HA IP was 192.168.0.35, I changed it via the supervisor to 192.168.1.35.
All devices are unavailable now... Zigbee2mqtt says 502: Bad Gateway...
What do I do, how to fix that?
Thanks in advance.
Update:
I tried doing this but there's no IP addresses there and there's only devices like my iPhone, but no light bulbs for example...
From the Terminal:
Change directory to /config/.storage:
cd /config/.storage
Then edit the core.config_entries file:
nano core.config_entries
Update 2:
I figured it out.
I went to Supervisor > Zigbee2mqtt > Configuration tab - there I noticed there was still old IP (server: mqtt://192.168.0.35:1883), I've updated that and now everything works again!
English
They just increased Turkish accounts prices, I’ll be paying £6 now instead of £3 for the top tier account