Yes, AMD will know if you've overclocked your Ryzen Threadripper 7000 CPU.
AMD says overclocking blows a hidden fuse on Ryzen Threadripper 7000 to show if you’ve overclocked the chip, but it doesn’t automatically void your CPU’s warranty::AMD explains the hidden fuses behind Ryzen Threadripper 7000 processors and how it will handle warranty claims.
That’s a bit shitty but hopefully they don’t just use it as a trap to deny any warranty coverage on an overclocked CPU.
Meanwhile Intel will void your warranty if you’ve enabled XMP. I don’t know if they have a way of telling if you did so or not but they will try to trick you into admitting it when you’re asking for an RMA.
Reviewers really should say “ok, well if it’s not covered by warranty then we’ll just do CPU benchmarks at the minimum JDEC speeds, as the manufacturer recommends”
Any good reviewer should already be doing a typical non-OC’d benchmark and an OC’d benchmark anyway.
The majority of people don’t overclock so would only care about the stock performance anyway. And overclockers should recognize that if you damage the chip by pushing it too far, it shouldn’t be covered.
Well what we’re talking about here is just memory speeds, not core overclocking. If you’re building a computer and you’re paying for RAM that is rated at a certain speed, you need to enable XMP to have it run at that speed. Since the memory controller is now integrated into CPUs, intel considers that overclocking so it voids your warranty. I think most people who are buying CPUs to build their own PCs know this and will not run at base JEDEC speeds.
Every single review and YouTube video, even from channels with broad appeal like LTT and the like always talk about the need to enable XMP and talk about it having to be enabled to get the advertised performance.
It gets advertised on memory kits and motherboards and they provide easy instructions on how to do it.
Eh, yeah maybe you’re right but it’s such a tremendous amount of performance to lose out on for a couple keystrokes. Any halfway decent guide for beginners should be mentioning it but I don’t know how people outside my circles build computers. Do they read/watch guides? Do they just plug shit together and pray that it works? 🤷♀️
Who the fuck is “we” here? Because the article is about CPU overlocking. I don’t give a fuck about the parent comments offhand comment about Intel. Intel is irrelevant here.
Your comment I replied to was about reviewer CPU benchmarks.
Who the fuck is we is literally the entire industry. Intel, AMD, every reviewer I have ever seen. Everyone.
Seriously, look at ANY review. They’re all done with XMP or DOCP profiles set, just as the CPU manufacturer, motherboard manufacturer, and memory manufacturer recommends.
I don’t give a fuck about what your offhand opinions are, I’m taking a out the reality. And the reality is that everyone is told to enable XMP.
Your comment I replied to was about reviewer CPU benchmarks.
…
You know memory speed impacts CPU performance right?
It’s not shitty, it’s fair. If damage is caused by the overclock why should the manufacturer foot the bill? You modified the product to run outside the specs!
The “shitty” part of it is it’s a binary one time feedback. If the fuse blows that’s it. It doesn’t matter if the CPU failed for something else the fuse can’t unblow. I don’t know what type of fuse they’re using, would it blow with any level of over clocking, or with an extreme amount, is it a time delayed fuse that requires a bunch of time over clocked or is it instant? If i want to over clock just a bit but test it at a higher clock rate before setting my desired speed will that blow the fuse? The only point of the fuse is to determine if the user “missused” their cpu at any point.
It’s probably a collection of fuses instead of just a single one. One for xmp, one for each of the pbo options, various ones for manual OCs. I’d guess there’s tiers of how aggressive the OC is, maybe a counter for how many times it was booted with that OC enabled.
I wonder how much extra cost that would add to CPU production. There’s probably some cost benefit analysis looking at the saving from denying warranties to the cost of extra components on the chip.
I think they’d scale well so it wouldn’t have that big of an impact. Like it could be one set of fuses for the entire chip. Even a KB of those fuses wouldn’t take up much area on modern chips. That’s if they are detecting settings or overall chip power.
If they are detecting OC damage to circuitry, that might involve a lot more fuses throughout the chip along with circuitry to read them (or at least detect their state), which could be more involved. Though there is already circuitry to test the functionality of the chip at a fine level for binning and QC, and it might be trivial to add some fuses to that.
It’s a bit shitty because we then have to trust that they won’t use this as an excuse to void the warranty on chips that had a fatal defect to begin with. Overclocking is pretty safe unless you’re doing extreme overclocking and they won’t say how they determine if a failure was caused by an overclock or not.
It’s definitely “more fair” for AMD than Intel to do it since they don’t charge a premium for unlocked processors but I still don’t like it. They developed PBO, it’s a feature included with the CPU I bought, I want to be able to use it without fear of losing my warranty, but even just enabling that will trip that fuse.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !technology@lemmy.world
This is a most excellent place for technology news and articles.
That’s a bit shitty but hopefully they don’t just use it as a trap to deny any warranty coverage on an overclocked CPU.
Meanwhile Intel will void your warranty if you’ve enabled XMP. I don’t know if they have a way of telling if you did so or not but they will try to trick you into admitting it when you’re asking for an RMA.
Reviewers really should say “ok, well if it’s not covered by warranty then we’ll just do CPU benchmarks at the minimum JDEC speeds, as the manufacturer recommends”
Hah yeah actually, that should become the standard for Intel CPU reviews.
Any good reviewer should already be doing a typical non-OC’d benchmark and an OC’d benchmark anyway.
The majority of people don’t overclock so would only care about the stock performance anyway. And overclockers should recognize that if you damage the chip by pushing it too far, it shouldn’t be covered.
Well what we’re talking about here is just memory speeds, not core overclocking. If you’re building a computer and you’re paying for RAM that is rated at a certain speed, you need to enable XMP to have it run at that speed. Since the memory controller is now integrated into CPUs, intel considers that overclocking so it voids your warranty. I think most people who are buying CPUs to build their own PCs know this and will not run at base JEDEC speeds.
There is literally nothing in the article about memory speeds
It’s entirely about overlocking the CPU .
The only thing about memory is your offhand comment about Intel and XMP which is entirely irrelevant to the article.
That’s definitely not common knowledge for people who build their own PC.
It definitely is.
Every single review and YouTube video, even from channels with broad appeal like LTT and the like always talk about the need to enable XMP and talk about it having to be enabled to get the advertised performance.
It gets advertised on memory kits and motherboards and they provide easy instructions on how to do it.
It’s common knowledge to enable it.
Eh, yeah maybe you’re right but it’s such a tremendous amount of performance to lose out on for a couple keystrokes. Any halfway decent guide for beginners should be mentioning it but I don’t know how people outside my circles build computers. Do they read/watch guides? Do they just plug shit together and pray that it works? 🤷♀️
It’s very prominent in any build guide, on even casual PC youtuber videos, in motherboard manuals, on ram kits.
It’s absolutely common knowledge to enable XMP, I dunno what that guy is smoking.
Most people don’t consider enabling the advertised memory clock speeds as an overclock.
We aren’t talking about taking your CPU and overclocking it. We’re talking about a simple UEFI checkbox that everyone is told to do.
Who the fuck is “we” here? Because the article is about CPU overlocking. I don’t give a fuck about the parent comments offhand comment about Intel. Intel is irrelevant here.
Your comment I replied to was about reviewer CPU benchmarks.
Who the fuck is we is literally the entire industry. Intel, AMD, every reviewer I have ever seen. Everyone.
Seriously, look at ANY review. They’re all done with XMP or DOCP profiles set, just as the CPU manufacturer, motherboard manufacturer, and memory manufacturer recommends.
I don’t give a fuck about what your offhand opinions are, I’m taking a out the reality. And the reality is that everyone is told to enable XMP.
…
You know memory speed impacts CPU performance right?
Enabling XMP isn’t overclocking the CPU. It wouldn’t blow this fuse.
So have you just abandoned what you said above, or are you just ignoring it?
AMD doesn’t consider it CPU overclocking, no. Intel does. That’s what I was replying to, as you very well know.
Intel is not in the article. Literally nothing about this post is about Intel other than an offhand remark about XMP.
The article is about AMD CPUs. I could not give a flying fuck about Intel.
It’s not shitty, it’s fair. If damage is caused by the overclock why should the manufacturer foot the bill? You modified the product to run outside the specs!
The “shitty” part of it is it’s a binary one time feedback. If the fuse blows that’s it. It doesn’t matter if the CPU failed for something else the fuse can’t unblow. I don’t know what type of fuse they’re using, would it blow with any level of over clocking, or with an extreme amount, is it a time delayed fuse that requires a bunch of time over clocked or is it instant? If i want to over clock just a bit but test it at a higher clock rate before setting my desired speed will that blow the fuse? The only point of the fuse is to determine if the user “missused” their cpu at any point.
It’s probably a collection of fuses instead of just a single one. One for xmp, one for each of the pbo options, various ones for manual OCs. I’d guess there’s tiers of how aggressive the OC is, maybe a counter for how many times it was booted with that OC enabled.
I wonder how much extra cost that would add to CPU production. There’s probably some cost benefit analysis looking at the saving from denying warranties to the cost of extra components on the chip.
I think they’d scale well so it wouldn’t have that big of an impact. Like it could be one set of fuses for the entire chip. Even a KB of those fuses wouldn’t take up much area on modern chips. That’s if they are detecting settings or overall chip power.
If they are detecting OC damage to circuitry, that might involve a lot more fuses throughout the chip along with circuitry to read them (or at least detect their state), which could be more involved. Though there is already circuitry to test the functionality of the chip at a fine level for binning and QC, and it might be trivial to add some fuses to that.
It’s a bit shitty because we then have to trust that they won’t use this as an excuse to void the warranty on chips that had a fatal defect to begin with. Overclocking is pretty safe unless you’re doing extreme overclocking and they won’t say how they determine if a failure was caused by an overclock or not.
It’s definitely “more fair” for AMD than Intel to do it since they don’t charge a premium for unlocked processors but I still don’t like it. They developed PBO, it’s a feature included with the CPU I bought, I want to be able to use it without fear of losing my warranty, but even just enabling that will trip that fuse.